ROYTON™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
ROYTON™ COUNTERTOP SINK
• Made from vitreous china
• Self-rimming with cutout template supplied
• Center drain outlet
• Front overflow
❏ 0571.000 Round sink without faucet deck
Nominal Dimensions:
349mm (13-3/4") Round
Bowl size:
273mm (10-3/4") round
140mm (5-1/2") deep
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
51mm
(2)
MIN.
610mm
(24)
A
B
51mm
(2)
38mm
(1-1/2)
MIN.
Vitreous China Fixtures
FINISHED
WALL
OR
175mm
(6-7/8)
SPLASH BACK
203mm
(8)
MIN.
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
349mm
(13-3/4)
C/L
848mm
(33-3/8)
COUNTERTOP
CUTOUT 324mm
(12-3/4) DIA.
686mm
(27)
MIN.
152mm
COUNTERTOP
(BY OTHERS)
(6)
MAX.
SEALING
COMPOUND
16mm
(5/8)
BARRIER FREE
CLEARANCE
229mm
(9)
MIN.
168mm
(6-5/8)
305mm
(12)
*
787mm
(31)
SUGGESTED
254mm
(10)
*
848mm
(33-3/8)
SUPPLIES
AS REQ'D.
203mm
(8)
178mm
(7)
FINISHED
FLOOR
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
To Be Specified:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Faucet*:
FITTING
A
B
CENTER-SET
SPREAD
27mm(1-1/16)
32mm(1-1/4)
102mm(4)
203mm(8)
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
* See faucet section for additional models available
*
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
J33
© 2008 AS America Inc.
Revised 2/08
|