Behringer Karaoke Machine mix800 User Manual

User Manual  
MINIMIX MIX800  
Ultra-Compact Karaoke Processor with Voice Canceller  
and Echo/Reverb Effects  
 
3
MINIMIX MIX800 User Manual  
4. Follow all instructions.  
16. Where the MAINS plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain  
readily operable.  
Important Safety  
Instructions  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
Terminals marked with this  
symbol carry electrical current of  
sufficient magnitude to constitute  
8. Do not install near any heat sources  
such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers)  
that produce heat.  
risk of electric shock. Use only high-quality  
commercially-available speaker cables with  
Legal Disclaimer  
1/ TS plugs pre-installed. All other installation 9. Do not defeat the safety purpose of the  
Technical specifications and appearance are  
subject to change without notice. The information  
contained herein is correct at the time of printing.  
All trademarks are the property of their respective  
owners. MUSIC Group accepts no liability for any  
loss which may be suffered by any person who  
relies either wholly or in part upon any description,  
photograph or statement contained herein. Colors and  
specifications may vary slightly from product.  
BEHRINGER products are sold through authorized  
dealers only. Distributors and dealers are not agents of  
MUSIC Group and have absolutely no authority to bind  
MUSIC Group by any express or implied undertaking  
or representation. This manual is copyrighted. No part  
of this manual may be reproduced or transmitted in  
any form or by any means, electronic or mechanical,  
including photocopying and recording of any  
kind, for any purpose, without the express written  
permission of MUSIC Group IP Ltd.  
or modification should be performed only by  
qualified personnel.  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding-type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
This symbol, wherever it appears,  
alerts you to the presence of  
uninsulated dangerous voltage  
inside the enclosure - voltage that may be  
sufficient to constitute a risk of shock.  
This symbol, wherever it appears,  
alerts you to important operating  
and maintenance instructions in  
the accompanying literature. Please read  
the manual.  
10. Protect the power cord from being  
walked on or pinched particularly at plugs,  
convenience receptacles, and the point where  
they exit from the apparatus.  
11. Use only attachments/accessories  
specified by the manufacturer.  
Caution  
To reduce the risk of electric  
shock, do not remove the  
12. Use only with  
the cart, stand, tripod,  
bracket, or table  
ALL RIGHTS RESERVED.  
© 2011 MUSIC Group IP Ltd.  
Trident Chambers, Wickhams Cay, P.O. Box 146,  
Road Town, Tortola, British Virgin Islands  
top cover (or the rear section). No user  
serviceable parts inside. Refer servicing to  
qualified personnel.  
specified by the  
manufacturer, or sold  
Caution  
with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
Limited Warranty  
§ 1 Warranty  
To reduce the risk of fire or  
electric shock, do not expose this  
appliance to rain and moisture. The apparatus  
shall not be exposed to dripping or splashing  
(1) This limited warranty is valid only if you  
purchased the product from a BEHRINGER  
authorized dealer in the country of purchase.  
A list of authorized dealers can be found on  
BEHRINGER’s website behringer.com under  
“Where to Buy“, or you can contact the  
BEHRINGER office closest to you.  
13. Unplug this apparatus during lightning  
liquids and no objects filled with liquids, such storms or when unused for long periods  
as vases, shall be placed on the apparatus.  
of time.  
Caution  
These service instructions are  
for use by qualified service  
14. Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power supply cord or plug is damaged,  
personnel only. To reduce the risk of electric  
(2) MUSIC Group* warrants the mechanical  
and electronic components of this product  
to be free of defects in material and  
workmanship if used under normal operating  
conditions for a period of one (1) year from  
the original date of purchase (see the Limited  
Warranty terms in § 4 below), unless a longer  
minimum warranty period is mandated by  
applicable local laws. If the product shows  
shock do not perform any servicing other than liquid has been spilled or objects have fallen  
that contained in the operation instructions.  
Repairs have to be performed by qualified  
service personnel.  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate  
normally, or has been dropped.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
15. The apparatus shall be connected to  
a MAINS socket outlet with a protective  
earthing connection.  
 
 
4
MINIMIX MIX800 User Manual  
any defects within the specified warranty  
period and that defect is not excluded under  
§ 4, MUSIC Group shall, at its discretion,  
either replace or repair the product using  
suitable new or reconditioned product or  
must be accompanied by a description of  
the problem and the serial number of the  
product. After verifying the product’s warranty or removed from the product.  
eligibility with the original sales receipt,  
(4) This limited warranty is invalid if the  
factory-applied serial number has been altered  
(5) Free inspections and maintenance/repair  
MUSIC Group will then issue a Return Materials  
work are expressly excluded from this limited  
warranty, in particular, if caused by improper  
handling of the product by the user. This also  
applies to defects caused by normal wear  
and tear, in particular, of faders, crossfaders,  
potentiometers, keys/buttons, guitar strings,  
illuminants and similar parts.  
parts. In case MUSIC Group decides to replace Authorization (“RMA”) number.  
the entire product, this limited warranty shall  
(2) Subsequently, the product must be  
apply to the replacement product for the  
returned in its original shipping carton,  
remaining initial warranty period, i.e., one  
together with the return authorization  
(1) year (or otherwise applicable minimum  
number to the address indicated by  
warranty period) from the date of purchase of  
MUSIC Group.  
the original product.  
(3) Shipments without freight prepaid will  
not be accepted.  
(6) Damage/defects caused by the  
following conditions are not covered by this  
limited warranty:  
(3) Upon validation of the warranty claim,  
the repaired or replacement product will  
be returned to the user freight prepaid by  
§ 4 Warranty Exclusions  
MUSIC Group.  
improper handling, neglect or failure to  
operate the unit in compliance with the  
instructions given in BEHRINGER user or  
service manuals;  
(1) This limited warranty does not cover  
consumable parts including, but not limited  
to, fuses and batteries. Where applicable,  
(4) Warranty claims other than those  
indicated above are expressly excluded.  
PLEASE RETAIN YOUR SALES RECEIPT.  
IT IS YOUR PROOF OF PURCHASE COVERING  
YOUR LIMITED WARRANTY. THIS LIMITED  
WARRANTY IS VOID WITHOUT SUCH PROOF  
OF PURCHASE.  
MUSIC Group warrants the valves or meters  
contained in the product to be free from  
defects in material and workmanship for  
a period of ninety (90) days from date  
of purchase.  
connection or operation of the unit in  
any way that does not comply with the  
technical or safety regulations applicable  
in the country where the product is used;  
damage/defects caused by acts of God/  
Nature (accident, fire, flood, etc) or any  
other condition that is beyond the control  
of MUSIC Group.  
(2) This limited warranty does not cover  
the product if it has been electronically  
or mechanically modified in any way.  
If the product needs to be modified or  
adapted in order to comply with applicable  
technical or safety standards on a national  
or local level, in any country which is not  
the country for which the product was  
originally developed and manufactured,  
this modification/adaptation shall not  
be considered a defect in materials or  
workmanship. This limited warranty does  
not cover any such modification/adaptation,  
regardless of whether it was carried out  
§ 2 Online registration  
Please do remember to register your  
new BEHRINGER equipment right after  
your purchase at behringer.com under  
“Support” and kindly read the terms  
and conditions of our limited warranty  
carefully. Registering your purchase and  
equipment with us helps us process your  
repair claims quicker and more efficiently.  
Thank you for your cooperation!  
(7) Any repair or opening of the unit carried  
out by unauthorized personnel (user included)  
will void the limited warranty.  
(8) If an inspection of the product by  
MUSIC Group shows that the defect in  
question is not covered by the limited  
warranty, the inspection costs are payable by  
the customer.  
§ 3 Return materials  
authorization  
(9) Products which do not meet the  
properly or not. Under the terms of this limited terms of this limited warranty will be  
warranty, MUSIC Group shall not be held repaired exclusively at the buyer’s expense.  
responsible for any cost resulting from such a MUSIC Group or its authorized service  
(1) To obtain warranty service, please contact  
the retailer from whom the equipment  
was purchased. Should your BEHRINGER  
dealer not be located in your vicinity,  
you may contact the BEHRINGER distributor  
for your country listed under “Support”  
at behringer.com. If your country is not  
listed, please check if your problem can be  
dealt with by our “Online Support” which  
may also be found under “Support” at  
behringer.com. Alternatively, please submit  
an online warranty claim at behringer.com  
BEFORE returning the product. All inquiries  
modification/adaptation.  
center will inform the buyer of any such  
circumstance. If the buyer fails to submit a  
written repair order within 6 weeks after  
notification, MUSIC Group will return the  
unit C.O.D. with a separate invoice for freight  
and packing. Such costs will also be invoiced  
separately when the buyer has sent in a  
written repair order.  
(3) This limited warranty covers only the  
product hardware. It does not cover technical  
assistance for hardware or software usage  
and it does not cover any software products  
whether or not contained in the product.  
Any such software is provided “AS IS” unless  
expressly provided for in any enclosed  
software limited warranty.  
 
5
MINIMIX MIX800 User Manual  
(10) Authorized BEHRINGER dealers do  
§ 9 Amendment  
not sell new products directly in online  
auctions. Purchases made through an online  
auction are on a “buyer beware” basis.  
Online auction confirmations or sales receipts  
are not accepted for warranty verification and  
MUSIC Group will not repair or replace any  
product purchased through an online auction.  
Warranty service conditions are subject  
to change without notice. For the latest  
warranty terms and conditions and additional  
information regarding MUSIC Group’s limited  
warranty, please see complete details online  
at behringer.com.  
* MUSIC Group Macao Commercial Offshore Limited of  
Rue de Pequim No. 202-A, Macau Finance Centre 9/J,  
Macau, including all MUSIC Group companies  
§ 5 Warranty transferability  
This limited warranty is extended exclusively  
to the original buyer (customer of authorized  
retail dealer) and is not transferable to anyone  
who may subsequently purchase this product.  
No other person (retail dealer, etc.) shall be  
entitled to give any warranty promise on  
behalf of MUSIC Group.  
§ 6 Claim for damage  
Subject only to the operation of mandatory  
applicable local laws, MUSIC Group shall have  
no liability to the buyer under this warranty for  
any consequential or indirect loss or damage  
of any kind. In no event shall the liability of  
MUSIC Group under this limited warranty  
exceed the invoiced value of the product.  
§ 7 Limitation of liability  
This limited warranty is the complete  
and exclusive warranty between you and  
MUSIC Group. It supersedes all other written or  
oral communications related to this product.  
MUSIC Group provides no other warranties for  
this product.  
§ 8 Other warranty rights and  
national law  
(1) This limited warranty does not exclude or  
limit the buyer’s statutory rights as a consumer  
in any way.  
(2) The limited warranty regulations  
mentioned herein are applicable unless they  
constitute an infringement of applicable  
mandatory local laws.  
(3) This warranty does not detract from  
the seller’s obligations in regard to any  
lack of conformity of the product and any  
hidden defect.  
 
6
MINIMIX MIX800 User Manual  
1. Introduction  
2. Control Elements and  
Sing along with this powerful karaoke machine! Its revolutionary Voice Canceller Connections  
effectively eliminates vocals from any stereo source while retaining most  
Please ensure that the unit is installed and operated only by people  
music elements. The integrated digital echo/reverb processor in 24-bit/40 kHz  
resolution assures ultimate vocal enhancement. We’ve included 2 independent  
mic channels with Level controls and Clip indicators for perfect level adjustment.  
A dedicated 2-band EQ provides for awesome vocal enhancement and sound  
shaping, and there is an accurate 6-digit LED output meter for precise level  
indication. Stereo Line Inputs/Outputs let you connect your favorite CD or MP3  
player, tape recorder and similar equipment. Long-term reliability is guaranteed  
with the high-quality potentiometers and illuminated switches. Ultra low-noise  
audio operational amplifiers offer outstanding sound performance.  
qualified to do so. During installation and operation the user must have  
sufficient electrical contact to earth. Electrostatic discharge may affect  
the operation of the unit.  
2.1 The front  
(3)  
(5) (6)  
(8) (10) (11)  
Karaoke has never been this easy and this much fun!  
1.1 Before you get started  
1.1.1 Shipment  
(1) (2) (4) (7)  
(9)  
Fig. 2.1: Front panel control elements and connectors of the MIX800  
Your MIX800 was carefully packed at the assembly plant to assure secure  
transport. Should the condition of the cardboard box suggest that damage may  
have taken place, please inspect the unit immediately and look for physical  
indications of damage.  
(1) MIC INPUT 1/2. 1 or 2 microphones can be connected using these 1/ jacks.  
(2) MIC LEVEL 1/2. The MIC LEVEL control adjusts the level of the  
microphone signal.  
Damaged equipment should NEVER be sent directly to us. Please inform  
the dealer from whom you acquired the unit immediately as well  
as the transportation company from which you took delivery.  
Otherwise, all claims for replacement/repair may be rendered invalid.  
After they pass the MIC LEVEL controls, the 2 microphone signals are  
combined into 1 mono signal.  
(3) CLIP. When the Clip LED lights up, distortion may occur in the microphone  
input of the MIX800. Reduce the microphone level with the MIC LEVEL  
control (2).  
Please always use the original packaging to avoid damage due to  
storage or shipping.  
Never let unsupervised children play with the MIX800 or with  
its packaging.  
(4) EQ LOW. The EQ LOW control allows you to raise or lower the low-frequency  
content of the microphone signal.  
Please dispose of all packaging materials in an environmentally  
friendly fashion.  
(5) EQ HIGH. With the EQ HIGH control, you can raise or lower the  
high-frequency content of the microphone signal.  
(6) ECHO/REVERB. The MIX800 allows you to add an effect to the microphone  
signal. When the ECHO/REVERB button is pressed in, you can add REVERB to  
the signal. When the button is pressed out, the ECHO effect is active.  
1.1.2 Initial operation  
Be sure that there is enough space around the unit for cooling. To avoid  
overheating, do not place the MIX800 on top of power amps or near radiators, etc.  
1 of the 2 effects is always active! Use the FX LEVEL control (7) to switch  
To power the MIX800, use only the power supply unit that is delivered  
with your equipment.  
off the effect or to adjust the effect intensity.  
(7) FX LEVEL. The FX LEVEL control determines the amount of effect that is  
added to the master signal.  
1.1.3 Online registration  
Turn this control fully to the left to switch off the active effect.  
Please register your new BEHRINGER equipment right after your purchase  
by visiting http://behringer.com and read the terms and conditions of our  
warranty carefully.  
(8) IN/OUT. Press the IN/OUT button to activate the Voice Canceller in the signal  
path. This filter circuit allows you to remove the vocals almost completely  
from a recording. The filter has been designed so that vocal frequencies  
will be processed without significantly affecting other music signals.  
What is more, the filter only works in the center of the stereo panorama,  
where vocals are usually positioned in a recording.  
Should your BEHRINGER product malfunction, it is our intention to have it  
repaired as quickly as possible. To arrange for warranty service, please contact  
the BEHRINGER retailer from whom the equipment was purchased. Should your  
BEHRINGER dealer not be located in your vicinity, you may directly contact  
one of our subsidiaries. Corresponding contact information is included in the  
original equipment packaging (Global Contact Information/European Contact  
Information). Should your country not be listed, please contact the distributor  
nearest you. A list of distributors can be found in the support area of our website  
(http://behringer.com).  
The Voice Canceller can be used for stereo signals only!  
(9) OUTPUT LEVEL. Set the volume of the output signal with the  
OUTPUT LEVEL control.  
(10) LED DISPLAY. The LED display is for monitoring the input level. It comprises  
6 LEDs. When the Clip LED lights up, distortion may occur in the MIX800  
output. Reduce the output level with the OUTPUT LEVEL control (9).  
Registering your purchase and equipment with us helps us process your repair  
claims more quickly and efficiently.  
(11) SWITCH. The switch turns your MINIMIX MIX800 on and off.  
Thank you for your cooperation!  
Attention: The switch does not fully disconnect the unit from the  
mains. To disconnect the unit from the mains, pull out the main cord  
plug or appliance coupler. When installing the product, ensure the  
plug or appliance coupler is readily operable. Unplug the power cord  
completely when the unit is not used for prolonged periods of time.  
 
 
7
MINIMIX MIX800 User Manual  
2.2 The rear  
4. Specifications  
(12) (13)  
(14)  
(15)  
Mic Inputs  
Connectors  
1/ stereo jack, balanced  
Input impedance  
Max. input level  
approx. 2 kΩ balanced  
-20 dBu  
Fig. 2.2: Rear panel connectors of the MIX800  
Audio Input  
(12) Use the 9 V jack to connect the power supply delivered with the unit.  
(13) These connectors are the unbalanced cinch outputs of the MIX800.  
(14) These connectors are the unbalanced cinch inputs of the MIX800.  
(15) SERIAL NUMBER.  
Connectors  
Cinch, unbalanced  
approx. 20 kΩ  
15 dBu  
Input impedance  
Max. input level  
Audio Output  
Type  
RCA connectors, unbalanced  
approx. 150 Ω  
3. Application Example  
The wiring example shown below gives you an idea of how to use the MIX800.  
Impedance  
Max. output level  
15 dBu  
CD-Player  
EUROLIVE B1520 PRO  
System Data  
Frequency response  
Dynamics  
10 Hz to 200 kHz, 0/-2 dB  
112 dB, 20 Hz to 20 kHz  
0.002% typ. @ 4 dBu  
-75 dB @ 1 kHz  
THD  
Signal crosstalk  
Signal-to-noise ratio  
EUROPOWER  
EP2000  
97 dBu @ 4 dBu, A-weighted  
IN  
L
IN  
R
OUT  
L
OUT  
R
Power Supply  
Mains connection  
Mains Voltage  
USA/Canada  
U.K./Australia  
China  
external power supply, 9 V~/750 mA  
120 V~, 60 Hz  
240 V~, 50 Hz  
220 V~, 50 Hz  
230 V~, 50 Hz  
100 V~, 50 - 60 Hz  
6 W  
XM1800S  
Europe  
Fig. 3.1: Using the MIX800  
Japan  
Power consumption  
Dimensions/Weight  
Dimensions (H x W x D) approx. 1.9 x 4.7 x 9.6/  
approx. 48 x 120 x 242.6 mm  
Weight  
approx. 1.34 lbs / 0.61 kg  
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,  
modifications may be made from time to time to existing products without prior notice. Specifications and  
appearance may differ from those listed or illustrated.  
 
 
8
MINIMIX MIX800 User Manual  
5. Other Mini Products  
The MINIBEAT belongs to the MINI suite of BEHRINGER products, which can  
operate together and are introduced below:  
MINIFEX FEX800  
Ultra-compact 9.5" stereo multi-effects processor for studio and  
stage applications  
16 awesome FX presets in 24-bit/48 kHz resolution including reverb, delay,  
chorus, flanger, phaser, rotary speaker, pitch shifter and multi-effects  
Intuitive FX Preset control with LED’s indicating the selected program  
MINIAMP AMP800  
Ultra-compact 9.5" headphones amplifier system for studio and  
stage applications  
4 totally independent stereo high-power amplifier sections  
Highest sonic quality with virtually all types of headphones even at  
maximum volume  
MINICOM COM800  
Ultra-compact 9.5" stereo modeling compressor for studio and  
stage applications  
16 awesome preset models for the most typical compression applications  
(vocal, drums, guitar, keyboard, etc.)  
Dedicated Compressor Modeling control with LED’s indicating the selected  
dynamics program  
MINIMIC MIC800  
Ultra-compact 9.5" microphone modeling preamp for studio and  
stage applications  
High-end preamplifier for all microphone, instrument and line-level sources.  
Perfectly complements studio-grade condenser mics  
Ultra-flexible Preamp Modeling allows you to quickly optimize  
your recordings  
MINIMON MON800  
Ultra-compact 9.5" monitor matrix mixer for studio and stage applications  
Dedicated input section with 4 selectable and mixable stereo inputs  
Accurate 6-digit LED main stereo output meters for precise level indication  
Fig. 5.1: MINI products stack on top of each other  
MINIBEAT BEAT800  
Ultra-compact 9.5" dual beat counter/phono preamp for studio and stage  
applications  
Intelligent dual BPM counters with Tempo Difference indicator  
Ultra-flexible Beat Assist and Sync Lock functions  
MINIFBQ FBQ800  
Ultra-compact 9.5" graphic equalizer for studio and stage applications  
Revolutionary FBQ Feedback Detection System instantly reveals critical  
frequencies and can also be used as Audio Analyzer  
Additional Low Cut filter removes unwanted frequencies, e. g. floor rumble  
 
 
9
MINIMIX MIX800 User Manual  
FEDERAL COMMUNICATIONS  
COMMISSION COMPLIANCE  
INFORMATION  
MINIMIX MIX800  
Responsible party name:  
Address:  
MUSIC Group Services US Inc.  
18912 North Creek Parkway,  
Suite 200 Bothell, WA 98011,  
USA  
Phone/Fax No.:  
Phone: +1 425 672 0816  
Fax: +1 425 673 7647  
MINIMIX MIX800  
complies with the FCC rules as mentioned in the following paragraph:  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC rules. Operation is subject to the  
following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may  
cause undesired operation.  
Important information:  
Changes or modifications to the equipment not expressly approved by MUSIC Group  
can void the user’s authority to use the equipment.  
 
We Hear You  
 

3M Oxygen Equipment 600107046 User Manual
Acer Mouse LZ20400161 User Manual
ADC Clothes Dryer UD 50 User Manual
ADTRAN Switch HDSL HTU C DDM+ User Manual
Airlink101 Computer Drive AWLL5099 User Manual
Allied Telesis Switch AT FH812U User Manual
Axor Plumbing Product 10058XX1 User Manual
Barco Home Theater System R9010300 User Manual
BB Electronics Surge Protector 232SP9 User Manual
Behringer Portable Speaker TRUTHB2030A User Manual